| Style | Insulated Cooler Tote |
| Material | 238 GSM Non-Woven Polypropylene with Thermal Foil Lining |
| Dimensions | 13in W x 15in H x 10in D (about 1,950 cu in) |
| Closure | Zippered Top |
| Handles | Dual Reinforced 24in Carry Handles |
| Base | Plastic Bottom Insert |
| Insulation | Thermal Foil Lining, Hot and Cold |
| Compliance | CPSIA, FDA, Prop 65 |
Custom cooler bags with a 238 GSM non-woven polypropylene exterior, full thermal foil lining, zippered top, plastic bottom insert and dual 24 in reinforced handles. Your logo printed on a 6 x 8 in area front and back, in 12 colors, from 50 bags.
Choose full color when the artwork carries gradients or photography, and screen print when it’s a flat logo going onto a large quantity. Pricing is all-in either way.
Pick one or more locations in the order builder. Your proof shows the artwork at each one before production starts.
50 pieces to start, and you can mix colors and sizes within one order.
The per-piece price drops again at 100, 250, 500 and 1,000 pieces. Decoration and a free visual proof are included at every tier.
Need more than the top tier? Request a bulk quote.
Spot Clean, Air Dry.
Custom cooler bags in an insulated tote format, with a 238 GSM non-woven polypropylene exterior, a full thermal foil lining and a zippered top. They’re for conferences, employee gifts and outdoor activations where a promotional bag needs to keep drinks cold and food hot for hours, not minutes.

A full-coverage reflective foil interior keeps cold things cold and hot things hot for roughly 2 to 4 hours, depending on the starting temperature and conditions. Pre-chill with ice packs or pre-warm with hot water to stretch that further. It suits catered events, picnic giveaways and holiday food gifts.

Two stitched-through 24 in handles are built for shoulder carry even when the bag is loaded, and a plastic bottom insert keeps the base flat under weight. The zippered top seals temperature in and stops spills in transit. At 13 x 15 x 10 in, about 1,950 cubic inches, it holds a six-pack of bottles, a stack of lunch containers or two days of conference giveaways.

The front and back each carry a 6 in W x 8 in H imprint area, twice the visibility of single-panel bags. Screen print suits bold marks and solid text, and full color handles gradients and photographs. Both panels appear on the proof so you can check the placement.


01 / 03
Branded swag attendees fill with drinks and keep using long after the event.
Pack it with snacks, drinks and branded merchandise for holiday or onboarding kits.
Picnics, sports events, beach giveaways and farmers markets.
A reusable insulated bag for loyalty programs and takeout that carries your brand home.
Need more than the top tier or a mix we don't show? Request a bulk quote.

The minimum is 50 bags. This is a bulk product, and the per-bag price falls at 100, 250, 500 and 1,000 bags, so larger events and gifting programs get the best rate.
Turnaround varies by product and decoration method, so we confirm the timing on your proof rather than quoting one number for everything. Shipping is fast and tracked from the moment it leaves. If you’re working toward an event, send artwork early and allow a day or two for proof review.
Yes to both sides. The front and back panels each have a 6 in wide by 8 in tall imprint area, so you can print one side, both with the same artwork, or two different designs. Embroidery isn’t offered on this bag because needle punctures would compromise the thermal foil seal. For an embroidered tote, see our custom tote bags with leather handles.
Roughly 2 to 4 hours, depending on the starting temperature and the conditions around it. For longer cold retention, pre-chill the bag and add ice packs. For hot retention, pre-warm it with hot water for 5 minutes before loading.
The non-woven polypropylene exterior is recyclable where #5 plastics are accepted, and the bag is built to be reused many times over. It’s CPSIA, FDA and Prop 65 compliant. Spot clean and air dry only.