No setup fees. Pricing is all-in.
(972) 532-0775[email protected]Mon to Fri, 9am to 5pm CST
| Style | 17 oz Vacuum Insulated Bottle |
| Capacity | 17 oz (500 ml) |
| Size | 10in H x 2.75in Dia |
| Material | 18/8 Stainless Steel, Double-Wall Vacuum |
| Lid | Screw-On Cap with Rubber Seal |
| Insulation | Keeps drinks cold or hot for up to 12 hours |
| Compliance | FDA compliant, Prop 65 labeled |
| Bottle | 17 oz, 18/8 stainless, double-wall vacuum, 10in H x 2.75in dia |
| Cap | Screw-on with rubber seal |
Custom insulated water bottles in double-wall 18/8 stainless steel, 17 oz with a rubber-seal screw cap, screen printed, laser engraved or printed in full color with your logo. Seven finishes, from 25 bottles, with the one-color print and a free proof included.
Print it for a giveaway, engrave it for a gift. The proof shows your mark on the exact finish before anything is decorated.
Pick one or more locations in the order builder. Your proof shows the artwork at each one before production starts.
25 pieces to start, and you can mix colors and sizes within one order.
The per-piece price drops again at 100, 250, 500 and 1,000 pieces. Decoration and a free visual proof are included at every tier.
Need more than the top tier? Request a bulk quote.
Hand wash only, not for microwave or freezer.
Custom insulated water bottles in double-wall 18/8 stainless steel, the 17 ounce cola-shaped bottle that keeps a drink cold or hot for the better part of a workday and fits a car cup holder on the way there. Seven finishes from brushed silver to matte black, a screw cap with a rubber seal that doesn’t weep in a bag, and your logo screen printed, laser engraved or printed in full color on the front, the back or both.
Two walls of 18/8 stainless with a vacuum between them mean ice water stays cold through a shift and coffee stays hot through a morning of meetings, without the outside sweating or burning a hand. At 17 ounces and 2.75 inches across it’s the size that lives in a cup holder, a bag pocket or a gym locker, which is why it’s the bottle people forget was a giveaway.
Matte Black with a silver cap, Matte Black, Matte Gray, Silver, White, Blue and Red. The matte powder coats take a screen print or a full-color print cleanly; laser engraving cuts through the coat to bare steel for a tone-on-tone mark that never wears, and looks especially sharp on the black and gray. Silver takes engraving as a dark etched mark.
The screw-on cap carries a rubber seal, so the bottle rides in a tote on its side without a leak. The narrow neck pours without splashing and takes ice cubes one at a time, and the whole thing hand-washes in a minute. It’s FDA compliant and carries the required California labeling, which is the detail procurement teams ask about.
01 / 03
A first-day bottle that’s still on the desk a year later.
An engraved bottle reads as a gift, not a promo item.
A premium giveaway at a mid-range price.
Member bottles that keep water cold through a class.
Up to 12 hours cold and several hours hot, thanks to the vacuum between the two steel walls. Pre-chilling the bottle or adding ice stretches the cold time; leaving the cap off shortens it.
Engraving for gifts and anything meant to last years: it can’t chip, and on the matte finishes it reads as a subtle metallic mark. Screen print for events and giveaways where a bright, high-contrast logo matters and budget counts. Full color when the artwork has gradients or more than two colors.
No. Vacuum bottles are hand-wash only; dishwasher heat can compromise the seal between the walls and dull the finish. Don’t freeze or microwave it either.
Yes. All seven finishes can share the 25-piece minimum with the same artwork and method. If half the order should be engraved and half printed, that’s two orders; request a bulk quote and we’ll price them together.
Yes. At 2.75 inches across the base it fits standard car and gym-equipment cup holders, and at 10 inches tall it stands under most center-console lids.
Choose Options
Choose Options
Choose Options
Choose Options
